The Avery Weigh-Tronix 7815R-BT shipping scale has a capacity of 150 pounds with a readability of 0.05 pound (0.1 NTEP) and a 12 x 14 inch (remote display/Ball-Top) pan and is NTEP legal for trade. The 7815 and the 7815R (Remote) offer a durable 12" x 14" Bench Scale that is ideal for use within busy post mail and shipping environments.
This fast, accurate weighing platform can be used as a standalone scale or interfaced to shipping manifest software or receiving stations.
Designed with a hard wearing ABS weight platter and a rugged aluminum die cast housing that helps to protect a centrally mounted aluminum analog load cell from damage.
The 7815 can be supplied with a built-in, flush-fitting, six digit ½” high LCD display that is mounted to the left in the front face of the base.
The 7815R offers the ability to remotely mount the display away from the base. The 7815 can also use a second remote display which can be plugged in to the rear of the base to give a customer facing weight reading (7815R has no 2nd remote display).
A range of emulation protocols is available within the scale to allow you to quickly select the correct compatible communication protocol to interface with a wide range of third party post, mail and shipping software programs or, host devices. This will be communicated through a serial RS232 port found on the rear of the base.
|Avery Weigh-Tronix - 7815R-BT|
|Readability||0.05 lb (0.1 NTEP)|
|Pan Size||12 x 14" (Remote Display/Ball-Top)|
1 x RS232 (9 way female D Type connector )
1 x 2nd Remote display connection (RJ 45)
All are positioned on the rear of the base
Standard NCI default with field configurable settings of 8213, 3835, SMA,
with Auto Weight Send (2400 – 19.2K baud range) Transmits weight and scale
status whenever ASCII “W”
|Display Type||Remote six digit, ½” high digit LCD display housed in an extruded enclosure with a 7 foot cable|
|Number of Displays Allowed||1 remote display|
|Display Bracket Options||Optional 12” high pole mounted display bracket|
|Remote Display Housing Sizes||8” x 3” x 1.5”|
ZERO: Includes Auto Zero Tracking or Manual push button to re-establish zero reference.
TEST: Runs a diagnostic test to ensure scale is fully functional, and allows a real-time view of internal settings
|Units of Measure||lb or kg (lb default)|
|Incremental Selections||Multiples and sub-multiples of 1, 2, 5|
Capacity, resolution, lb or kg, filters, baud rates, protocols, auto printout, scale or post classifier
Default configuration is as postal weight classifier
150 x 0.1 lb (150 x 0.05 lb Non approved)
75 x 0.05kg
|Base Size||12” x 14” x 4.5” (305mm x 357mm 114mm)|
Rugged with powder coated die cast aluminum housing and load bridge,
housing a aluminum NTEP approved analog load cell
|Top Pan Construction||Stainless steel weight platter w/ stainless steel ball top weight platter (9 balls)|
|Feet||Lockable adjustable feet, 1” diameter with up to 1” of height adjustment|
|Power||120 VAC (+10% -15%), 60 Hz, standard 3-wire ground|
Temperature: 42°F to 104°F (5°C to 40°C)
Relative Humidity: 10 to 95% (non-condensing)
2 point calibration process (zero and span capacity)
Field calibration can be carried out by using less than full capacity weights
Gravity compensation to allow the local gravity to be entered for where the scale is to be used
|Internal Resolution||1 part in 120,000|
|Filtering||Fast or Slow|
2 level diagnostics: front panel display test or full service diagnostics.
(Display, RAM, ROM, input/output & high resolution x10 division test)
|Pole Mount||12” high pole indicator stand, to allow easy viewing of the remote indicator|
|Certifications||NTEP approved for use in Class III operations, CC 00-96|
|Item No||Accessory||Your Price|
|AWT05-508632||Remote display kit, 12" post||$225.00|