|
W-9 Form (pdf)
|
Contact Us
|
E-mail: info@affordablescales.com
|
View Your Shopping Cart
The Avery Weigh-Tronix 7880-250-BT shipping scale has a capacity of 250 pounds with a readability of 0.1 pound and a 18 x 18 inch (Ball-Top) pan and is NTEP legal for trade. The 7880 durable 18" x 18" Bench Scale provides the best accurate and reliable weight measurement for static or inline shipping applications.
Designed with a hard wearing stainless steel weight platter and a rugged powder coated, carbon steel base housing that helps to fully protect the centrally mounted aluminum analog load cell from damage.
Supplied with a built-in flush fitting, six digit 1/2" high LCD display that is mounted centrally in the front face of the base.
An optional second remote display can be plugged in to give a customer facing weight reading.
A range of emulation protocols are available within the scale to allow you to quickly select the correct compatible communication protocol to interface with a wide range of third party post, mail and shipping software programs or host devices. This will be communicated through either a serial RS232, USB (HID) or USB (VCP) port found on the rear of the base.
| Avery Weigh-Tronix - 7880-250-BT | |
|---|---|
| Capacity | 250 lbs |
| Readability | 0.1 lb |
| Pan Size | 18 x 18" (Ball-Top) |
| Connectivity |
1 x RS232 (9 way female D Type connector ) 1 x USB HID (Mini USB) or 1x USB VCP (USB-Type B) 1 x 2nd Remote display connection (RJ 45) All are positioned on the rear of the base |
| Supported Protocols |
Standard NCI default with field configurable settings of 8213, 3835, SMA, with Auto Weight Send (2400 – 19.2K baud range) Transmits weight and scale status whenever ASCII “W” <CR> is sent by a remote device. |
| Display Type |
Flush fitting six digit, ½” high LCD display Optional 2nd remote six digit, ½” high LCD display housed in an extruded enclosure with a 7 foot cable, connected via RJ 45 connector on the rear of the scales base |
| Number of Displays Allowed | 2 (1 standard, 1 remote display optional) |
| Display Bracket Options | Optional 12” high pole mounted display bracket |
| Remote Display Housing Sizes | 8” x 3” x 1.5” |
| Operational Keys |
ZERO: Includes Auto Zero Tracking or Manual push button to re-establish zero reference. TEST: Runs a diagnostic test to ensure scale is fully functional and allows a real-time view of internal settings |
| Units of Measure | lb or kg (lb default) |
| Incremental Selections | Multiples and sub-multiples of 1, 2, 5 |
| Configurable Selections |
Capacity, resolution, lb or kg, filters, baud rates, protocols, auto printout, scale or post classifier Default configuration is as postal weight classifier |
| Base Capacity | 250 x 0.05 lb (150 x 0.05 kg) |
| Base Size | 18” x 18” x 4.5” (457mm x 610mm 114mm) |
| Base Construction |
Durabridge® design with powder coated carbon steel base housing and aluminum NTEP approved analog load cell Duarabridge Technology helps reduces overall scale deflection when a full load is applied |
| Top Pan Construction |
Stainless steel weight platter Ball top weight platter (25 ball) |
| Ball Top Weight Platter |
Stainless steel, using 25 roller balls to simplify handling and transport of all parcels. One piece lift-off design for easy field retrofit |
| Feet | Lockable adjustable feet, 1” diameter with up to 1” of height adjustment |
| Power | 120 VAC (+10% -15%), 60 Hz, standard 3-wire ground |
| Operating Environment |
Temperature: 42°F to 104°F (5°C to 40°C) Relative Humidity: 10 to 95% (non-condensing) |
| Calibration |
2 point calibration process (zero and span capacity) Field calibration can be carried out by using less than full capacity weights Gravity compensation to allow the local gravity to be entered for where the scale is to be used |
| Internal Resolution | 1 part in 120,000 |
| Filtering | Fast or Slow |
| Self-Diagnostics |
2 level diagnostics: front panel display test or full service diagnostics. (Display, RAM, ROM, input/output & high resolution x10 division test) |
| Pole Mount | Optional 12” high pole indicator stand, to allow easy viewing of the remote indicator |
| Certifications |
NTEP approved for use in Class III operations, CC 95-121 Canada Weights and Measures approval CC # AM-5099 Rev1 |
| Item No | Accessory | Your Price |
|---|---|---|
| AWT05-508632 | Remote display kit, 12" post | $225.00 |
| AWT05-508631 | Remote display kit, 7 foot cable | $213.90 |
Print this page
Brochure (PDF)