|
W-9 Form (pdf)
|
Contact Us
|
E-mail: info@affordablescales.com
|
View Your Shopping Cart
The Avery Weigh-Tronix 7821 shipping scale has a capacity of 200 pounds / 100 kg with a readability of 0.05 pound / 0.02 kilograms and a 12 x 14 inch pan and is NTEP legal for trade. The 7821 is a 200 lb 12” x 14” dual unit switching Bench Scale that provides a fast accurate weight reading that fits into any operation as a stand-alone scale, interfaced to shipping manifest software, or receiving station.
Supplied with an easy-to-use unit switching key that allows the scale to be easily switched between lb and kg. The 7821 is ideal for most international shipping applications.
Designed with a hard-wearing stainless steel weight platter and a rugged aluminum die cast housing and load bridge that offers outstanding protection to the centrally mounted aluminum analog load cell.
Supplied with a built-in, flush-fitting, six digit ½” high LCD display that is mounted in the front face of the base.
A range of emulation protocols are available within the scale to allow you to quickly select the correct compatible communication protocol to interface with a wide range of third party post mail & shipping software programs or host devices. This will be communicated through either a serial RS232, USB (HID) or USB (VCP) port found on the rear of the base.
| Avery Weigh-Tronix - 7821 | |
|---|---|
| Capacity | 200 lbs / 100 kg |
| Readability | 0.05 lb / 0.02 kg |
| Pan Size | 12 x 14" |
| Connectivity |
1 x RS232 (9 way female D Type connector ) 1 x USB HID (Mini USB) or 1x USB VCP (USB-Type B) |
| Supported Protocols |
Standard NCI default with field configurable settings of 8213, 3835, SMA, with Auto Weight Send (2400 – 19.2K baud range) Transmits weight and scale status whenever ASCII “W” <CR> is sent by a remote device. |
| Display Type | Flush fitting six digit, ½” high LCD display |
| Remote Display Housing Sizes | 8” x 3” x 1.5” |
| Operational Keys |
ZERO: Includes Auto Zero Tracking or Manual push button to re-establish zero reference. UNITS: allows the scale to be easily changed from lb to kg |
| Units of Measure | lb or kg |
| Incremental Selections | Multiples and sub-multiples of 1, 2, 5 |
| Configurable Selections |
Capacity, resolution, filters, baud rates, protocols, auto printout, scale or post classifier Default configuration is as postal weight classifier |
| Base Capacity | 200 x 0.05 lbs / 100 x 0.02 kg |
| Base Size | 12” x 14” x 4.5” (305mm x 357mm 114mm) |
| Base Construction |
Rugged with powder coated die cast aluminum housing and load bridge, housing a aluminum NTEP approved analog load cell |
| Top Pan Construction |
Stainless steel weight platter Optional: Ball top weight platter (9 balls) |
| Feet | Lockable adjustable feet, 1” diameter with up to 1” of height adjustment |
| Power | 120 VAC (+10% -15%), 60 Hz, standard 3-wire ground |
| Operating Environment |
Temperature: 42°F to 104°F (5°C to 40°C) Relative Humidity: 10 to 95% (non-condensing) |
| Calibration |
2 point calibration process (zero and span capacity) Field calibration can be carried out by using less than full capacity weights Gravity compensation to allow the local gravity to be entered for where the scale is to be used |
| Internal Resolution | 1 part in 120,000 |
| Filtering | Fast or Slow |
| Self-Diagnostics |
2 level diagnostics: front panel display test or full service diagnostics. (Display, RAM, ROM, input/output & high resolution x10 division test) |
| Ball Top Weight Platter |
Stainless steel, using 9 roller balls to simplify handling and transport of all parcels. One piece lift-off design for easy field retrofitting |
| Certifications |
NTEP approved for use in Class III operations, CC 95-070 Canada Weights and Measures approval CC # AM-5076 Rev 4 |
| Item No | Accessory | Your Price |
|---|---|---|
| AWT05-508632 | Remote display kit, 12" post | $225.00 |
| AWT05-508631 | Remote display kit, 7 foot cable | $213.90 |
Print this page
Brochure (PDF)